ClickToFit
ClickToFit
Manufacturing · Facts · Process chains
Page: Process

Three processes, each with its own character.

Laser Wire DED, WAAM and SAAM belong to the family of wire-based metal deposition processes. All three build up metal layer by layer from wire. They differ mainly in energy source, protection of the melt pool, deposition rate and geometric resolution.

Laser Wire DED

Laser Wire DED: controlled energy input.

In Laser Wire DED, metal wire is locally melted with a laser and deposited selectively. The process is particularly suitable when controlled heat input, finer structures, and higher geometric quality matter.

Laser wire process head — focused laser spot with wire feed and controlled melt zone
Figure 1: Laser wire process head — focused laser spot with wire feed and controlled melt zone.
WAAM

WAAM: massive build-up with an arc.

WAAM uses an arc as the energy source and processes metal wire at a high deposition rate. The process becomes particularly interesting when large volumes are to be built up economically.

WAAM arc deposition — massive weld beads on a large metal structure at industrial scale
Figure 2: WAAM arc deposition — massive weld beads on a large metal structure at industrial scale.
SAAM

SAAM: high deposition through submerged arc welding.

SAAM uses submerged arc welding for layer-by-layer metal build-up. An arc melts the fed wire under a protective layer of flux. The slag that forms is removed before the build continues. The process is particularly suited to large metal blanks with a high build volume and subsequent machining.

SAAM process — the arc burns beneath the flux layer and is visible only as a glow; previously built layers beside it
Figure 3: SAAM process — the arc burns beneath the flux layer and is visible only as a glow; previously built layers beside it.

At FIT

The systems behind the three processes

The images above are schematic illustrations. The photos show the systems themselves: the laser wire head, the WAAM system in FIT production, and the SAAM system at the Technologie-Campus.

Laser wire process head on a robot above the build table, with the operator tablet next to it
Laser Wire DED: process head on the robot
WAAM system from Gefertec with FIT logo in the production hall
WAAM: system in FIT production
SAAM system with two industrial robots and a large rotary table
SAAM: system at the Technologie-Campus (SAAM Forum 2025)

Not better or worse. Different.

The right choice depends not only on the material. Decisive are part size, geometry, heat input, accessibility, target accuracy, and post-processing.

Laser Wire DED

precise, fine, highest geometric freedom

WAAM

balanced, versatile, the all-rounder

SAAM

large, fast, highest deposition rate

Comparison matrix — Laser Wire DED, WAAM, and SAAM positioned by precision, deposition rate, and geometric complexity
Figure 4: Comparison matrix — Laser Wire DED, WAAM, and SAAM positioned by precision, deposition rate, and geometric complexity.

The process is only the beginning.

Whether a part is truly suitable is decided by geometry: overhangs, heat nodes, accessibility, build direction, and post-processing determine the real effort.